Experimental investigation of combustion characteristics of a CH4/O2 premixed flame: Effect of swirl intensity on flame structure, flame stability, and emissions, Case Studies in Thermal Engineering, Volume 55, March 2024, 104069 (IF 6.8, JCR 7.30%) (https://doi.org/10.1016/j.csite.2024.104069)

Energy and Exergy Analysis of Solid Oxide Electrolysis Cell (SOEC) Hydrogen Production System under High Current Density (HCD) and Endothermic Operating Conditions, Int J Energy Research, Revision submitted

A novel CO2-free hydrogen production system: a cascade combination of oxyfuel combustion, methane decomposition, and bi-reforming, Energy, 2023, submitted - under review (IF 9.0, JCR 4.0%)

Dynamic simulation of solid oxide fuel cell / proton exchange membrane fuel cell hybrid power generation considering power-grid demand fluctuation. Energy, 2023, Under preparation (IF 9.0, JCR 4.0%)

Dynamic simulation and exergy analysis of adsorption chiller powered by low-grade waste heat from fuel cell system: Effect of multi-bed configuration and time constant, Energy Conversion and Management, 293 (2023) 117453 (IF 10.4, JCR 1.80%) (https://doi.org/10.1016/j.enconman.2023.117453)

Performance analysis of high-efficiency gas turbine power cycles using recompression and CO2 working fluid, ASME J. Energy Resour. Technol. 1-34, JERT-23-1382 (I.F. 3.0) (https://doi.org/10.1115/1.4064291)

New definition of levelized cost of energy storage and its application to reversible solid oxide fuel-cell, 2022, Energy 239(15), 122220

2021, Exergetic evaluation of operation results of 5-kW-class SOFC-HCCI engine hybrid power generation system, 2021, Applied Energy 295(1), 117037.

Study on Internal Phenomena of Solid Oxide Fuel Cells Using Liquefied Natural Gas as Fuel. 2021, Journal of The Electrochemical Society, Volume 168, Number 12. 124513

2021, System simulation and exergetic analysis of solid oxide fuel cell power generation system with cascade configuration, 2021, Energy 214,119087.

Parametric Study of a Supercritical CO2 Power Cycle for Waste Heat Recovery with Variation in Cold Temperature and Heat Source Temperature. 2021, Energies, 14, 66

System integration and proof-of-concept test results of SOFC–engine hybrid power generation system, Applied Energy 277,115542. 2020

Environmental impact of fresh tomato production in an urban rooftop greenhouse in a humid continental climate in south korea, Sustainability 12(21), 9029, pp. 1-13., 2020

System simulation and exergetic evaluation of hybrid propulsion system for crude oil tanker: A hybrid of solid-oxide fuel cell and gas engine, Energy Conversion and Management 223,113265., 2020

Waste heat utilization in reversible solid oxide fuel cell systems for electrical energy storage: Fuel recirculation design and feasibility analysis, Journal of Energy Storage 29,101434, 2020

A novel electrical energy storage system based on a reversible solid oxide fuel cell coupled with metal hydrides and waste steam, Applied Energy 262,114522., 2020

Exergoenvironmental analysis of methanol production by steam reforming and autothermal reforming of natural gas, Energy 181, 1273-1284, 2019

Life-cycle cost minimization of gas turbine power cycles for distributed power generation using sequential quadratic programming method, Energies 11(12) 2018, 3511.

Yun, J., Cho, K., Lee, Y.D., Yu, S., 2018, Four different configurations of a 5 kW class shell-and-tube methane steam reformer with a low-temperature heat source, International Journal of Hydrogen Energy 43(9), pp. 4546-4562.

Lee, Y.D., Ahn, K.Y., Morosuk, T., Tsatsaronis, G., 2018, Exergetic and exergoeconomic evaluation of an SOFC-Engine hybrid power generation system, Energy 145, pp. 810-822.

Kim, G., Lee, Y.D., Sohn, C.H., Choi, K.W., Kim, H.S. 2015, Experimental investigation on combustion and emission characteristics of a premixed flame in a gas-turbine combustor with a vortex generator, Applied Thermal Engineering 77, pp. 57-64.

Lee, Y.D., Ahn, K.Y., Morosuk, T., Tsatsaronis, G., 2015, Environmental impact assessment of a solid-oxide fuel-cell-based combined-heat-and-power-generation system, Energy 79(C), pp. 455-466.

Park, S.H., Lee, Y.D., Ahn, K.Y., 2014, Performance analysis of an SOFC/HCCI engine hybrid system: System simulation and thermo-economic comparison, International Journal of Hydrogen Energy 39(4), pp. 1799-1810. (Corresponding author)

Kim, S., Jung, J.Y., Song, H.H., Lee, Y.D., Kang, S., 2014, Optimization of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine hybrid system for distributed power generation, International Journal of Hydrogen Energy 39(4), pp. 1826-1840.

Petrakopoulou, F., Lee, Y.D., Tsatsaronis, G., 2014, Simulation and exergetic evaluation of CO2 capture in a solid-oxide fuel-cell combined-cycle power plant, Applied Energy 114, pp. 417-425.

Lee, Y.D., Ahn, K.Y., Morosuk, T., Tsatsaronis, G., 2014, Exergetic and exergoeconomic evaluation of a solid-oxide fuel-cell-based combined heat and power generation system, Energy Conversion and Management 85, pp. 154-164. (First author)

Cho, S.-Y., Cho, C.-H., Ahn, K.-Y., Lee, Y.D., 2014, A study of the optimal operating conditions in the organic Rankine cycle using a turbo-expander for fluctuations of the available thermal energy, Energy 64, pp. 900-911.

Cho, J.-H., Yu, S.-S., Kim, M.-Y., Lee, Y.D., Ahn, K.-Y., Ji, H.-J., 2013, Dynamic modeling and simulation of hydrogen supply capacity from a metal hydride tank, International Journal of Hydrogen Energy 38(21), pp. 8813-8828.

Cho, S.-Y., Ahn, K.-Y., Lee, Y.D., Kim, Y.-C., 2013, Pressure and force on a blade row operated in partial admission with different solidity, Journal of Mechanical Science and Technology 27(2), pp. 387-396.

Cho, S.-Y., Ahn, K.-Y., Lee, Y.D., Kim, Y.-C., 2012, Optimal design of a centrifugal compressor impeller using evolutionary algorithms. Mathematical Problems in Engineering 2012,752

Lee, S., Ahn, K.Y., Lee, Y.D., Im, S., Yu, S., 2012, Flow uniformity of catalytic burner for off-gas combustion of molten carbonate fuel cell, Journal of Fuel Cell Science and Technology 9(2),021006.

Cho, S.-Y., Ahn, K.-Y., Lee, Y.D., 2011, Performance characteristics of a partially admitted small-scale mixed-type turbine, International Journal of Turbo and Jet Engines 28(4), pp. 299-307.

Yu, S., Im, S., Kim, S., Lee, Y.D., Kang, S., Ahn, K., 2011, A parametric study of the performance of a planar membrane humidifier with a heat and mass exchanger model for design optimization. International Journal of Heat and Mass Transfer 54(7-8), pp. 1344-1351.

Park, S.K., Kim, T.S., Sohn, J.L., Lee, Y.D., 2011, An integrated power generation system combining solid oxide fuel cell and oxy-fuel combustion for high performance and CO2 capture, Applied Energy 88(4), pp. 1187-1196.

Yu, S., Han, J., Lee, S.M., Lee, Y.D., Ahn, K.Y., 2010, A dynamic model of PEMFC system for the simulation of residential power generation, Journal of Fuel Cell Science and Technology 7(6), 061009.

Tak, S.H., Park, S.K., Kim, T.S., Sohn, J.L., Lee, Y.D., 2010, Performance analyses of oxy-fuel power generation systems including CO2 capture: Comparison of two cycles using different recirculation fluids, Journal of Mechanical Science and Technology 24(9), pp. 1947-1954

Pak, P.S., Lee, Y.D., Ahn, K.Y., 2010, Comprehensive evaluation of a CO2-capturing high-efficiency power generation system for utilizing waste heat from factories, International Journal of Energy Research 34(12), pp. 1096-1108.

Yu, S., Hong, D., Lee, Y.D., Lee, S., Ahn, K., 2010, Development of a catalytic combustor for a stationary fuel cell power generation system, Renewable Energy 35(5), pp. 1083-109

Pak, P.S., Lee, Y.D., Ahn, K.Y., 2010, Characteristics and economic evaluation of a power plant applying oxy-fuel combustion to increase power output and decrease CO2 emission, Energy 35(8), pp. 3230-3238.